Setup ADB

There are two ways to setup ADB for the Khadas VIM. The methods portrayed are common with other Android products.

ADB over Wi-Fi/LAN

• Ensure that either the Wi-Fi or LAN is connected.
• Enable ADB debugging on your Device: Settings-->Developer options--->USB debugging
• Check the IP address of your Device: Settings-->About device--->Status--->IP
• Run the adb connect command:

  $ adb connect 192.168.1.120 connected to 192.168.1.120:5555 $ adb shell

ADB over USB

• Ensure that a USB-C cable is connected between your PC and VIM.
• Enable ADB debugging on your device: Settings-->Developer options--->USB debugging
• Open a terminal and type:

  $ adb shell

Resources

• Android Debug Bridge