Manually configuring a grandstream device

You will need to get access to the phone's web GUI, this is done by navigating to the IP address of the phone on a computer that is connected to the same network as the phone.

 

Once at the web GUI you will need to log in with either the manufacturer's (admin/admin) default credentials or the supplier's credentials.

 

Now that you are logged in, navigate to Maintenence then select the provisioning option.

 

Once you are in here, you just need to change the Config Server Path to:

apps1-aws.iplogin.ca/cfg/?mac=

 

And change the Provision Via to Https

 

Now you just need to press save and power cycle the phone