Htek UC926 Quickstart Guide

Getting Started

LED
Power Indicator: Steady green when power on, blinking green when the call is ringing. Line Keys: Steady green: During the conversation, or plan to dial a call. Blinking red: The call is ringing. Off: Idle interface.

Place a call
Three ways to make a call:

• Handset: Pick up the handset; enter the number, then press the send soft key or press #.
• Speaker: Press the speaker button or the line keys; enter the number, then press the send soft key or press #.
• Headset: Press the headset button; enter the number, then press the send soft key or press #. 

End a call
To end a call in three different modes:

• Handset: Hang up the handset or press the Cancel soft key.
• Speaker: Press the speaker button, or press the Cancel soft key.
• Headset: Press the Cancel soft key. 

Answer a call

• Handset: Pick up the handset.
• Speaker: Press the speaker button.
• Headset: Press the headset button. 

Note: You can also reject the call by press the Reject soft key.

Redial
Press the redial button to redial the last call that dialed.

Hold
Press the hold button or press the Hold soft key during a call to hold the call. Press the hold button or resume the soft key to resume the call.

Call Transfer
Blind Transfer

1. Press the transfer button or transfer soft key during the conversation, the call is on hold now.
2. Enter the number that transfers to.
3. Press the transfer button or the Transfer soft key and now the blind transfer completed.

If a BLF button is set up for the extension you are wanting to transfer to, pressing the BLF button will automatically perform a Blind Transfer

Attended Transfer (at least one line key set as Auto)

1. Press the transfer button or transfer soft key during the conversation, the call is on hold now.
2. Enter the number that transfers to and press the send soft key or #.
3. Start the second conversation, press the transfer button or transfer soft key, then transfer completed. 

Semi-Attended Transfer (at least one line key set as Auto)

1. Press the transfer button or transfer soft key during the conversation, the call is on hold now.
2. Enter the number transfer to, and then press the transfer button, then you can hear the ring tone.
3. Press the transfer button or the Tran soft key and now the Semi-attended transfer completed. 

Call Conference
Assuming that A and B are in conversation. A wants to bring C into a conference:

1. A presses line 2, the call is placed on hold.
2. A enters the number of C and then press the conference button to send soft key or C answers the call.
3. A presses the conference button or the conference soft key, then A, B and C are now in a conference.

Call Mute
Press the mute key to mute the microphone during the call. Press again to un-mute the conversation.